Campagnolo Small Parts (1998-2008)
Find small parts by category
Ergo Shifter Parts
For levers 2009 and later, we can only replace the whole shifter mechanism as a "pro kit." Right/rear derailleur side ergo levers should be rebuilt ever 10k-15k miles, depending on maintenance and riding conditions. We recommend replacing (at a minimum) G springs, spring carrier, and bushing when rebuilding a pre-2009 right side lever. Campagnolo Ergopower (1998-2008) manuals show how to rebuild a lever with detailed pictures and step-by-step instructions. We can rebuild, upgrade, or retro-fit your 1999-2008, 9 or 10 speed ergo levers for you. Call the shop for more information. 206 323 1218
Front Derailleur Small Parts
Most Campagnolo front derailleur parts can be interchanged among Record, Chorus, Centaur, Veloce, Mirage and even a few older front derailleurs. You may convert a braze-on front derailleur to a clamp-on model by purchasing a clamp adapter. A Record front derailleur will accept a Chorus or Centaur cage assembly and vice-versa. You may also switch cage assemblies between two and three chain ring Record, Chorus or Centaur front derailleurs.
Rear Derailleur Small Parts
Most Campagnolo rear derailleur parts can be interchanged among Record, Chorus, Centaur and Veloce rear derailleurs. Campagnolo Record and Chorus rear derailleur cages are interchangeable. So are 2004 to current Centaur and Veloce rear derailleur cages. However, you may not switch to a Centaur cage with a Chorus, nor a Veloce with a Record. Record and Chorus cages bolt to the rear derailleur body while all years Centaur and Veloce cages affix via a small "C" clip.
We also rebuild rear derailleurs in our shop! Click here for more details.
Brake Caliper Parts
We carry a selection of Campagnolo brake caliper parts for pre-skeleton/2000+ calipers.
*Note: If you have a single pivot rear caliper, spring required is BR-RE108, dual pivot rear calipers require BR-RE008.
Part NOT listed are no longer available.
Front Hub Parts
Campagnolo Record, Chorus and Centaur hubs use oversized aluminum alloy axles, adjustable 5/32 ball bearings and feather light, one piece alloy shells. All three models are exceptionally easy to overhaul, adjust and maintain. All parts are replaceable and most are interchangeable between the three models. Most Campagnolo hub parts may also be used with Campagnolo factory wheels.
Some Campagnolo factory front wheels, Bora, Neutron and Euros, use a special front hub axles to accommodate twin dust caps. The rear axles are the same as Campagnolo road hubs.
We suggest using Le Tour Whisper White grease for lubricating Campagnolo hubs.
Parts NOT listed are no longer available.
Rear Hub Parts
Campagnolo Record, Chorus and Centaur hubs use oversized aluminum alloy axles, adjustable 5/32 ball bearings and feather light, one piece alloy shells. All three models are exceptionally easy to overhaul, adjust and maintain. All parts are replaceable and most are interchangeable between the three models.
Most Campagnolo hub parts may also be used with Campagnolo factory wheels. Some Campagnolo factory front wheels, Bora, Neutron and Euros, use a special front hub axles to accommodate twin dust caps. The rear axles are the same as Campagnolo road hubs.
We suggest using Le Tour Whisper White grease for lubricating Campagnolo hubs.
Parts NOT listed are no longer available.
Headset Parts
We carry a wide selection of Campagnolo threaded headset replacement parts. Many Record parts are identical to Chorus. Some Record parts, like upper and pressed in races are the same dimensions as Chorus, but of higher quality. You may use them to replace worn Chorus parts and/or upgrade your Chorus threaded headset.
Parts NOT listed are no longer available.