700.jpg
Accessories

Campagnolo Brake Pads BR-RE701 for Carbon Rims

54.88

Campagnolo Dual Pivot pads are easily replaceable. Carefully pry a small flat bladed screwdriver under the pad at the open end of the holder. Gently twist the screwdriver and pry the pad away from the holder. The pad will start to lift and come out of the holder. Repeat one or two times until the pad pops off the holder. 

To install new pads remove one holder at a time from your caliper. Reinstall the holder when you have inserted the new pad. It is easy confuse right and left holders or put them on backwards. Coat the replacement pad with talc and push it in by hand. Put the closed end of the alloy holder on a soft block of wood. Gently tap the extended end of the rubber pad with a small hammer until it seats completely into the holder. 

Dual Pivot pads come as a set of four rubber pads WITH OUT the alloy holders. 

RE 701 pads fit: 
Year 2000 to current Record and Chorus brake calipers
Year 2001 Daytona brake calipers
Year 2002 Centaur brake calipers. 
They are designed for use with Carbon rims such as those used with Campagnolo Hyperon wheels. 

Visit our Campagnolo Brake Parts page to read about replacement parts for year 2000 to current Campagnolo brakes. 

Made in Italy by Campagnolo and backed with a three year warranty.

Quantity:
Add To Cart
700.jpg